Services | All Time Media

Essential Flood Preparation Tips

Mary Searles 12/02/2017 0 Comments

If you predict that the rainy season is about to start, the best thing you can do is to make adequate preparation. Preparing your home in advance will save you a lot of troubles that come with flooding. Consult washington water damage for flood water damage. Flooding can cause more havoc than you can ever imagine.

It is better to spend a lot of money preparing for floods than actually having to deal with the results of flooding. To prevent flooding when the rainy season finally comes, do a thorough inspection of your home and make the necessary repairs prevent flooding and water damage.

How to prepare for your home for rainy season

Leaky roofs and walls

Before the rainy season begins, take time and inspect your roof and walls for cracks. Sometimes you may not be able to do this on your own so involve the services of professional. These are the people who will identify leaks and cracks that you may not be able to notice.

Once they identify the leaks, the next step is to carry out the necessary repairs. Leaking roofs and walls are the causes of flooding, and you will be surprised how a small leak can cause extensive damage.

Gutters and drainage systems

Gutters and drainage systems are important because they allow water to leave your house and compound. If your gutters and drainage system are not in good condition, rain water will still enter your home. Before the rain start, make sure you clean your gutter.

Sometimes the gutters may be filled with dirt, and this will block movement of water. Also, make sure that the drainage system is clear to allow movement of water. Sometimes when the drainage is blocked, water accumulates in your compound and eventually goes to your house. This is what causes flooding most of the time.

Extra sealing and protection

Sometimes you might find that your roof is intact, and your drainage is clear, but your home is still prone to draining. To protect your home further from flooding, it is important that you take further action to protect your home. For instance, for additional protection, you can use a waterproof cover on your roof to make sure that your roof is well protected from water.

Also, remember to seal all parts of the home likely to be water inlets. Just to be sure that you are secure you can buy a water pump in your home. This will be a good measure in case what enters your home by mistake.…

Types of locks

Viola Nguyen 10/01/2017 0 Comments

Locksmiths have been a very useful and essential task now-a -days. With the increase in materialistic temptation, people lust for possessing something has increased. Look a professional locksmith in Auckland to install all types of locks. Due to this reason, people require a more safe and sound thing that should protect their precious stuff and other materials through hard work.

Types of locks used by locksmith

Dead Bolt

Dead Bolt also known as deadlocks are different in the aspect of cylinder they contain. Its locking organism is different from the general spring-bolt lock. It cannot be moved in an open position until the cylinder is moved due to which it is resistant to open the specific door until the right key is inserted.

Dead Bolt Lock might be the solitary cylinder as well as the Double Cylinder.
Single Cylinder: In Single Cylindered Dead Bolt Lock, the key is inserted only in one way and twist the cylinder in the other direction.
Double Cylinder: in Double Cylinder, it accepts the key from both ways and hence when twisted is unlocked.

Mortise Lock

Mortise Locks consist of a pocket or a lock that contain a particular lock. This pocket is the connected to the door or other locking things like door, safes e.t.c. These locks were more prevalent in the older buildings, but now they again entered the market as many residents use this lock system in market place and their homes as well. Parts of Mortise Lock
There are normally four parts of Mortise Locks.
Lock Body: it is the part in which the Mortise Locking System is to be placed which is in-the-door to be cut into a considerable shape.
Lock Trim: a smack or a line frame which is associated through bolts and fixed as plate after the lock has been installed in the door.
Keyed Cylinder: it by and large works as the locking or unlocking system in which the key is placed in.
Mortising Jig: it cuts the pocket into accurate cutting.

Love Padlocks

These are connected to the fence or the railings in the park. They are usually found abroad in Eastern countries. These are connected in public areas which are a symbol of love. China was the first country to invent this locking system.

Key Retainer

It a metal unit hat is placed on the door or a wall. Key Retainer comprises of two keys that work in correspondence with each other.
Key A is an interchangeable core whereas Key B is used for authorization.
Process: first of all, the key is inserted in any one of these key retainers while the other part is held constant and then they released.…